2025 TRU Series ELATION

TRU Standard Features

• Solid steel I-beam foundation for structural support
• Nylon-reinforced vapor barrier for energy efficiency, lower heating/cooling bills, and moisture protection
• Thick blanket of insulation installed throughout for maximum comfort
• Engineered floor system providing a sturdy base for new flooring
• Interlocking floor decking to maintain a flat, structurally sound floor
• Water-resilient, no-wax flooring throughout for easy cleanup
• Plumbing installed inside insulation to maintain consistent water temperatures
• Exterior walls built with traditional side studs (16" centers) and thick insulation for enhanced energy efficiency

Detailed Specifications

• HUD Code compliant
• 20 lb. Roof Load Standard (30 psf optional)
• Wind Zone I Standard (Wind Zone 2 optional)
• Thermal Zone 3 Standard
• I Beam options (12" or 10", model specific)
• Outriggers and crossmembers spaced 96" apart
• Flush headers on front/rear
• Spread axles (overslung mounted) with two brake axles or more as required
• 8" detachable hitch beam
• 2x6 joists on 16" on-center spacing
• TRU Select linoleum throughout
• Decking made from 19/32" 4x8 OSB T&G panels
• Smart Panel siding with ThermoPly Structural Sheathing as house wrap
• Exterior faucet and ice dam protection
• Front door: In-swing with storm protection
• Rear door: Out-swing 9-lite design
• 6-panel interior doors
• Lux® Argon Gas Low‑E Windows (sizes as per prints)
• 25-year 3‑tab shingles
• Trusses set on 24" on-center spacing with 7/16" OSB sheathing and blown fiberglass insulation
• Textured ceiling with options for vault or flat configurations and attic ventilation (static & ridge vents)
• 40 Gallon Rheem® Hybrid Heat Pump Water Heater
• Stainless steel double‑bowl kitchen sink
• Pfister® metal faucets throughout
• 54" ABS plastic tubs in bathrooms (master and hall)
• Whole house water shut‑off, ice maker readiness, and Pex plumbing with Oeitiker clamps
• Electric heat with gas optional, metal ductwork, and Ecobee® Smart Thermostat
• 200 amp load center (100 amp option available with gas orders)
• LED light bulbs installed throughout
• Panel box designed to accommodate solar equipment wiring
• Exterior walls: 2x4 construction with 16" on-center spacing; sidewalls and endwalls at 7'-0"
• Interior walls: 2x3 construction with 24" on-center spacing, finished with 3/8" paper on gypsum (raw gypsum in closets)
• DuraCraft cabinets and TRU Select laminant countertops
• Closet Maid vinyl‑wrapped metal closet shelving and utility shelving above the washer/dryer
• ENERGY STAR® rated appliances including an 18 CF refrigerator (dishwasher optional) and Frigidaire® Glass Top Range (gas optional) with a 30" range hood (minimum 100 cfm, sidewall vented)
• TRU Select THERMAL system: Floor insulation R‑22 (with wrapped ductwork), Wall insulation R‑13, plus additional ceiling specifications